J&M Fluidics, Inc. - Air-Cooled Semi-Hermetic Process Chillers

Availability

• Cooling capacities from 16 ton to 88 tons
• Dual Copeland Semi-Hermetic Compressors
• LCD Touchscreen Controller

Standard Features (All Models)

Air-Cooled Semi-Hermetic Chillers (Packaged)

J&M Fluidics' Air-Cooled Semi-Hermetic Process Chiller Product Line is ideal for larger industrial
cooling and refrigeration applications. Available in 15 to 120 HP. Chiller systems are also available in
split condenser configurations. STANDARD ON ALL J&M MODELS: Pentra Microsmart,
Programmable Logic Controller (PLC) with HMI Touch Screen Display.

Available Options (Most Models)

• Remote Idec touchscreen control panel
• Industrial VPN Router
• 5 Port Ethernet Switch
• BacNet Gateway
• Process Pump VFD Controller
• 4 year extended compressor warranty
• 115 volt (rain tight) service outlet
• Non Fused Disconnect
• Phase Monitor, line voltage monitor offering protection
against phase loss/reversal, unbalance and hi/lo voltage
• Compressor fusing
• Compressor Sound Cover
• Flooded cond. w/receiver/head pressure control (0°F)
• Heated, flooded cond. w/receiver/head pressure
control (-20°F)
• Factory installed evaporator heat tape freeze protection
• Fused, STAINLESS STEEL process pump
• Dual process pump with manual changeover
• Dual process pump with auto changeover
• Pump suction isolation valve
• Water pressure gauge set
• Water Flow Meter
• Copper finned condenser coil (coastal protection)
• BohnGuard^{T M} coated condenser coil (coastal protection)
• Epoxy or Phenolic coated fins (coastal protection)
• Auto city water make up solenoid
• Stainless steel, SCH80 PVC or Polypropylene piping for
deionized and reverse osmosis water systems

> Catalog Download - PDF

Availability

• Outdoor Condenser Section
• Discharge and Liquid Line ball valves on indoor
and outdoor equipment

Split System Models Only

• Outdoor Condenser Section
• Discharge and Liquid Line
ball valves on indoor
and outdoor equipment.

Tank Models Only

• Storage tank sight glass
• Tank low liquid level indicator with dry contacts

Model: PSA62D

Model: PSA45D
(Back side View)

• ETL listed to UL1995 & CAN/CSA C22.2
No. 236-11, 4th edition, 10/14/2011
• Single Point Power Connection
• Idec microprocessor controller with easy to use
HMI touch screen display
• STAINLESS STEEL, brazed plate evaporator
• SEMI-HEMETIC compressor with crankcase heater and
vibration spring mounting kit
• Compressor discharge and suction pipe vibration eliminators
• Suction Accumulator
• Liquid sight-glass, solenoid, TXV and replaceable core drier
• Water flow switch
• 24V control transformer
• Fan cycle control (+40°F)
• Direct drive condenser fan motor
• Rust resistant, high CFM, aluminum condenser fan blade
• Condenser(s): copper tube/aluminum fin, Floating Tube T M
• 5 year condenser warranty against tube sheet leaks
• Compressor motor contactor
• Individual condenser motor contactors and fusing
• Condenser control panel with factory mounted door interrupt
disconnect switch
• Galvanized steel sheet metal cabinet
• 1/2 inch insulation on all water and refrigerant lines
• Operating Refrigerant charge from factory