![Shadow effect](assets/padips-divider.png)
Water-Cooled Semi-Hermetic Process Chillers
![](assets/asset-1444701429938.png?v=0.8460985759073577)
J&M Fluidics' Water-Cooled Semi-Hermetic Process Chiller Product Line is ideal for many refrigeration/cooling applications. Available in 15 to 120 HP. Cooling tower or other water source is required. If you have any questions, please give us a call. We are here to help.
Inside Control Cabinet shown
![](assets/Custom-Water-Cooled-Semi-Hermetic-single-circuit.gif)
Custom-Chiller Model
![](assets/asset-1445350416263.png?v=0.5754616449121386)
• ETL listed to UL1995 & CAN/CSA C22.2 No. 236-11,
4th edition, 10/14/2011
• Single Point Power Connection
• Idec microprocessor controller with easy to use
HMI touch screen display
• STAINLESS STEEL, brazed plate evaporator
• SEMI-HEMETIC compressor with crankcase heater and vibration
spring mounting kit
• Compressor discharge and suction pipe vibration eliminators
• Suction Accumulator
• Liquid sight-glass, solenoid, TXV and replaceable core drier
• Water flow switch
• 24V control transformer
• Condenser(s): shell and tube
• Compressor motor contactor
• Galvanized steel sheet metal cabinet
• 1/2 inch insulation on all water and refrigerant lines
• Operating Refrigerant charge from factory
Standard Features (All Models)
• Remote Idec touchscreen control panel
• Industrial VPN Router
• 5 Port Ethernet Switch
• BacNet Gateway
• Process Pump VFD Controller
• 4 year extended compressor warranty
• 115 volt (rain tight) service outlet
• Non Fused Disconnect
• Phase Monitor, line voltage monitor offering protection
against phase loss/reversal, unbalance and hi/lo voltage
• Compressor fusing
• Compressor Sound Cover
• Condenser water regulating valve
• Factory installed evaporator heat tape freeze protection
• Fused, STAINLESS STEEL process pump
• Dual system pump with manual changeover
• Dual system pump with auto changeover
• Pump suction isolation valve
• Water pressure gauge set
• Water Flow Meter
• Stainless steel, SCH80 PVC or Polypropylene piping for
deionized and reverse osmosis water systems
Split System Models Only
• Outdoor Condenser Secrtion
• Discharge and Liquid ball valves on indoor and
outdoor equipment
Available Options (Most Models)
Tank Models Only
• Storage tank sight glass
• Discharge and Liquid ball valves on indoor and
outdoor equipment
• Auto city water make up solenoid
Call Toll-Free: (888) 539-1731
![](assets/Intertek-logo-black.gif)
Water-Cooled Semi-Hermetic
Chiller Model
It's All about Building a Better Product for Our Clients!
![](assets/STWC24S_view1_website.jpg)
Model: Custom 25 Ton
Water-Cooled Semi-Hermetic
with Chiller Barrel
Call Us Toll-Free, We are here to answer any questions you may have in choosing
the right J&M Chiller model for your application: (888) 539-1731
STANDARD ON ALL J&M MODELS:
Pentra Microsmart, Programmable Logic Controller
(PLC) with HMI Touch Screen Display.
Note: Click on
Blue Linked Copy to Bring Up Additional Information.
![](assets/J_M_Built_in_America.png)
![](assets/PSW15SH5_side1b.jpg)
![](assets/PSW15SH5_side2b.jpg)
New Smaller
Compact Size!
Model: PSW15S
Water-Cooled
Semi-Hermetic
Chiller.
15 Ton, Single-Circuit
Side / Front View
Back / Side View
55" Long Frame
![](assets/PSW55DH5_front-side-b.jpg)
Model: PSW55D
Back / Side View
Front / Side View
62.5 Nominal Ton, Dual-Circuit, Water Cooled Chiller
(2) Semi-Hermetic Compressors
![](assets/PSW55DH5_back-side-b.jpg)
Electrical Cabinet
![](assets/Data-Sheet-Art262170.jpg)